- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
Views: 21 Author: Site Editor Publish Time: 2023-03-31 Origin: Site
Standard Determination Between Austenitic and Ferritic Austenitic Sanitary Tubing Under Pindee Pipe Abstract
This particular covers grades of Stainless Steel AISI 304 Seamless tube, Stainless Steel AISI 316 Welded Pipe, furthermore, vigorously cold worked austenitic and ferritic/austenitic ASTM A270 tubing. Seamless and welded pipes will be produced using good processes, without including welding at any stage. Welded pipes will be manufactured using mechanized welding processes, and the filling metal in the welding system will not expand. By performing cold processing before final annealing, not only is the wall thickness reduced, but also the weld thickness is reduced by no less than 33%, allowing for the production of heavier cold processed pipes. Fillers shall not be used during welding. All materials will be equipped in the heat-treated state. Conduct a material inspection of inventory or a cylinder that may undergo a horizontal movement for each intensity. Each cylinder will undergo mechanical testing, such as reverse leveling test, hydrostatic pressure test, or non-destructive electrical test.
The attached surface finish may be expressed as: factory finish, precision clean surface finish, finish 80, finish 120, finish 180, finish 240, electropolished finish, and the most extreme roughness of ordinary surface finish. Vertical cleaning of surfaces will be carried out within the surface, while circumferential cleaning of surfaces will be carried out on the inner surface, outer surface, or both.Welcome to Pindee to purchase stainless steel to our email address:sales@pindee.com
Standard Determination Between Austenitic and Ferritic Austenitic Sanitary Tubing Under Pindee Pipe Scope
1.1 This determination covers grades of seamless, welded, and vigorously cold worked welded austenitic and ferritic/austenitic stainless steel sanitary tubing intended for use in the dairy and food industry and having exceptional surface completions. Drug quality might be mentioned, as a strengthening prerequisite.
1.2 This determination conceals tubes in sizes up to and including 12 in. [300 mm] in outside diameter.ASTM A270 tubing
1.3 The values expressed in either SI units or inch-pound units are to be viewed independently as standard. The qualities expressed in every framework may not be accurate counterparts; consequently, every framework will be utilized autonomously of the other. Joining values from the two frameworks might result in non-conformance with the norm.
1.4 Discretionary valuable necessities are given, and when at least one of these are wanted, each will be so expressed in the request.
1.5 This global standard was created as per universally perceived standards on normalization laid out in the Choice on Standards for the Advancement of Worldwide Guidelines, Guides and Suggestions gave by the World Exchange Association Specialized Hindrances to Exchange (TBT) Panel.
